Sometimes you don’t have GUI when you need remote support, luckily you don’t need it even if you have only one device.
What is what?
- Tmux is terminal multiplexer which allows you to have “multiple terminals” in one terminal. You can also detach it which means returning to the terminal where you ran tmux leaving tmux and everything there running and later return to it.
- WeeChat is popular text based IRC client.
Note: WeeChat has multiple optional depedencies, but I am only listing the most important ones (I will return to it later) unless they are all in one package.
- Arch & deriatives:
sudo pacman --needed -S tmux weechat perl gpm pastebinit
- Debian & deriatives:
sudo apt-get install weechat-curses weechat-plugins gpm pastebinit
tmux and you will find yourself in a new shell, but with tmux
bar on the bottom where you see open “windows”.
*Note: Tmux users ctrl + b by default instead of ctrl + a as it was developed in screen. That can be changed with tmux.conf (check further reading after WeeChat).
- Ctrl + b + c = new “window”
- Ctrl + b + number = move to “window” number
- Ctrl + b + x = kill “window”
- Ctrl + b + w = interactive “window” selection
- Ctrl + b + d = detach tmux (return with
Time to finally go to IRC. Go to tmux first and there run
if your distribution has ancient version of WeeChat,
in that case you should upgrade (if your distribution is
Debian/Ubuntu/Raspbian, use this repository)).
WeeChat welcomes you and suggests you to read at least the quickstart guide and recommends reading user’s guide too, but in this case we can skip those.
First we must connect to the network where the support channel of our distribution is.
- Add the network to WeeChat.
/server add liberachat irc.libera.chat/6697 -ssl -autoconnect
- Connect there.
- Join the channel of your distribution.
- you can also join multiple channels at once by separating them by
- you can also join multiple channels at once by separating them by commas e.g.
You might want to have friendly channel listing and be able to click the
channels with mouse? That is why you installed perl and gpm (you might
sudo systemctl start gpm or whatever init system you use).
/script install buffers.pl
Now you should see bar with the core buffer (
weechat), server buffers
merged to it (
#distribution. If mouse doesn’t work, you
/buffer X where X is the number to move. For moving between merged
buffers move to the buffer and press Ctrl + x.
And the last thing, if you need to see just plain lines without
sidebars or anything, press
alt + l (
alt can be replaced with
You are often wanted to pastebin something which can be difficult without GUI. Luckily there is pastebinit which you can use instead of typing everyting by hand.
pastebinit file.txtto pastebin the content of
dmesg | pastebinitto pastebin output of
Pastebinit replies by givig you address to the paste which you can then give to IRC.
Alternatives to pastebinit with some pastebins:
command | curl -F 'f:1=<-' ix.io
command | curl -F 'sprunge=<-' http://sprunge.us
These also answer by giving you link to the paste.
- pastebinit homepage